Jackson Avenger LT

Standard Features

• Automatic fill
• Push button start
• Labyrinth type door design
• Automatic pumped drain for floor and wall drain installations
• Recirculating wash and rinse
• Stainless steel wash/rinse pump
• Electromechanical components
• Manual override for extended wash and deliming
• Simplified controls allow easy access for operation and service
• Door safety switch
• Pumped drain
• One (1) each peg and combination rack included
• Above water scrap tray
• Three built-in chemical pumps for detergent, rinse aid and sanitizer

Specifications

• Uses 1.2 gallons (4.5 liters) of water per rack
• Uses 28.8 gallons (109 liters) of water per hour
• Cleans 24 racks per hour
• Two minute automatic cycle
• Powerful 3/4 hp wash pump motor
• Fresh water rinse eliminates wash water contamination
• Air insulated between body and stainless steel housing
• 304 stainless steel construction
• Sustaining heating element maintains final rinse between 120° F (49° C) and 140° F (60° C)
• Product alarms alert operator - visually and audibly - when detergent and sanitizer are low

Notes

• A vent hood is not recommended above the Jackson Avenger® LT as it does not produce excessive vapors. Always check with the local building code to know what type of ventilation is required for commercial dish machine installations in your area.
• Normal operation of the Avenger LT® generates steam that may escape from the door. Materials such as wood laminate, veneers, etc. are unsuitable for use in areas exposed to dishwasher steam and detergents. Stainless steel or other moisture-resistant shields are recommended for surfaces adjacent to Avenger LT® sides and top.