Jackson Avenger HT

Standard Features

• Automatic fill
• Push button start
• Labyrinth type door design
• Automatic pumped drain for floor and wall drain installations
• Pre-installed water pressure regulator
• Stainless steel wash pump
• Electromechanical components
• Manual override for extended wash and deliming
• Simplified controls allow easy access for operation and service
• Door safety switch
• Pumped drain
• One (1) each peg and combination rack included
• Above water scrap tray
• Built-in chemical pumps for detergent and rinse aid

Specifications

• Uses 1.1 gallons (4.2 liters) of water per rack
• Uses 26.4 gallons (99.9 liters) of water per hour
• Cleans 24 racks per hour
• Two minute automatic cycle
• Powerful 3/4 hp wash pump motor
• Built-in booster heater
• Fresh water rinse eliminates wash water contamination
• Air insulated between body and stainless steel housing
• Sani-Sure™ feature assures proper rinse water temperature
• 304 stainless steel construction
• Unique timer allows the machine to be customized for extended cycle times

Notes

• A vent hood is not recommended above the Jackson Avenger® HT as it does not produce excessive vapors. Always check with the local building code to know what type of ventilation is required for commercial dish machine installations in your area.
• Normal operation of the Avenger HT® generates steam that may escape from the door. Materials such as wood laminate, veneers, etc. are unsuitable for use in areas exposed to dishwasher steam and detergents. Stainless steel or other moisture-resistant shields are recommended for surfaces adjacent to Avenger HT® sides and top.