Glastender MF24-SF

24" Mug Froster / Chiller, Stainless Steel Front & Sides

Price: $1,707.59

No Sales Tax (except KY)

OEM Numbers

MF24-SF, MF24-SF1, MF24-SF2


10 oz Steins 105
Dimensions 24 x 24x 34 1/2
Exterior Stainless Steel Front & Sides w/ Galvanized Steel Back
HP 1/3
Interior Stainless Steel
Lids 1
Shelves 1 Shelf
Volts 120
Warranty 1 year parts and labor, 5 year on compressor
Weight 200 Pounds

Spec Documents

Spec Sheet (PDF)
glastender mf24-sf

Model Shown MG24-SF

Social Share Icons

Learn more about the MF24-SF

Model Specifics:
Stainless Steel Front and Sides

Standard Features:

  • Self-contained refrigeration
  • All stainless steel interior construction with radius corners for easy cleaning
  • Perfect exterior dimensions: 24″ front to back and 24″, 36″, or 48″ left to right
  • CFC free foamed-in-place insulation
  • Two Defrost Cycles: automatic - occurs every six hours without affecting normal operation, manual - user selected for complete six-hour defrost with automatic restart
  • Optional 3-3/4″ casters or 6″ legs are available
  • Three exterior options: black vinyl-clad steel, stainless steel front & sides, or all stainless steel
  • Three shelving options: standard (bottom), one additional layer, or two additional layers
  • Six-foot grounded cord & plug included (exits left rear)
  • Automatic condensate evaporator - no drain connection required
  • One-piece integral top and mullion design



  • 120V, 1 phase, 60 Hz, 6.7 full load amps
  • Dedicated 15 amp circuit is recommended
  • Includes a 6-foot grounded cord and plug which exits the left rear of the refrigeration compartment


  • 1/3 HP, 404A refrigerant
  • Operating range: 0ºF (-18ºC) to 35ºF (2ºC)
  • Fin & tube evaporator with forced air circulation


  • Interior floor drain and condensate drain to automatic evaporator. No drain connection required


  • 24″ Model: 105 10-oz mug total capacity; 41 bottom shelf, 41 middle shelf, 23 top shelf


  • Optional 6″ legs, specify accessory #MFLS
  • 1-5/8″ diameter
  • Stainless steel bullet feet


  • 20 gauge stainless steel parts include: top, door, interior floor, back*, front*, and sides* (*if all stainless finish is specified)
  • 20 gauge black vinyl-clad steel parts include: sides, front, and back (if black vinyl-clad steel exterior is specified)
  • 22 gauge stainless steel parts include: interior walls
  • 16 gauge stainless steel parts include: legs* (* if specified)
  • 16 gauge galvanized steel parts include: base
Sign up to receive special discounts and news.